How to Install Cabinet Handles?


Cabinet handles are an essential part of any kitchen or bathroom. They provide a functional and stylish way to open and close cabinets, drawers, and cupboards. Cabinet handles also add a decorative touch to the overall look of the room.

Installing cabinet handles is relatively easy and can be done in a few simple steps. Cabinet handles are available in a variety of styles, colors, and finishes to match any decor. Installing cabinet handles is an inexpensive way to update the look of your kitchen or bathroom without having to replace the entire cabinet. Take a note that there is a difference between handles made for doors and for cabinets.

Cabinet handles are a small yet significant detail that can elevate the look of your kitchen cabinets. If you’re planning to update your kitchen or bathroom, installing new cabinet handles is a cost-effective and straightforward way to give your space a fresh new look. if you would like to install a door, then it will be a different process from installing a cabinet handle. However, if you’ve never installed cabinet handles before, it can be overwhelming and intimidating.

But don’t worry, we’ve got you covered! In this guide, we’ll take you through a step-by-step process on how to install cabinet handles, including tools you’ll need and some helpful tips to make the process as smooth as possible.

Tools You’ll Need

Before diving into the installation process, make sure you have the necessary tools. You’ll need:

  • Cabinet handles
  • Measuring tape
  • Pencil
  • Drill
  • Drill bit
  • Screwdriver
  • Level
  • Masking tape

Steps to Install Cabinet Handles

1. Remove the Old Cabinet Handles

Remove the Old Cabinet Handles

Removing old cabinet handles can be a simple and straightforward process. First, you will need to locate the screws that are holding the handle in place. These screws are usually located on the inside of the cabinet door or drawer. Once you have located the screws, use a screwdriver to remove them.

Once the screws are removed, you can then pull the handle away from the cabinet. If the handle is stuck, you may need to use a flathead screwdriver to pry it off. After the handle is removed, you can then install your new cabinet handles.

2. Measuring for Placement

The first step in installing cabinet handles is to measure for placement. To do this, follow these steps:

  1. Determine the center point of the cabinet door.
  2. Measure the distance between the two screw holes on the back of the cabinet handle.
  3. Divide that distance in half to find the center point of the handle.
  4. Place a small piece of masking tape on the center point.
  5. Repeat this process for all the doors and drawers.

Once you have marked the center point, you can proceed with drilling the holes for the handles.

3. Drilling Holes for Cabinet Handles

Now that you have marked the center point, you can drill the holes for the cabinet handles. Follow these steps:

  1. Choose a drill bit that is the same size as the screws that came with your cabinet handles.
  2. Using the drill, make a hole at the center point you marked earlier. Make sure to drill straight through the door or drawer.
  3. Repeat this process for all the doors and drawers.

4. Attaching Cabinet Handles

Once you have drilled all the holes, you can now attach the cabinet handles. Follow these steps:

  1. Insert the screw into the back of the handle.
  2. Line up the screw with the hole you drilled in the cabinet door.
  3. Using a screwdriver, tighten the screw until the handle is securely in place.
  4. Repeat this process for all the handles.

Tips and Tricks

Installing cabinet handles may seem like a straightforward process, but there are a few tips and tricks that can make the installation process much easier.

  • Use a level to ensure that your handles are straight.
  • If you’re drilling through a painted surface, use masking tape to prevent chipping.
  • If your cabinet doors are made of a soft material, like pine, use a smaller drill bit to prevent splitting.
  • If your handles are not sitting flush against the cabinet, use a washer to create a tighter fit.


Installing cabinet handles is a simple yet effective way to give your kitchen or bathroom cabinets a fresh new look. By following the step-by-step guide above, you can easily install cabinet handles like a pro. Remember to take accurate measurements, use the proper tools, and take advantage of the helpful tips and tricks we’ve provided.

If you’re unsure about any step of the process, don’t hesitate to seek the help of a professional. With a little effort and patience, you can have new cabinet handles installed in no time and enjoy the updated look of your space.

Leave a Comment