– Login Admin


When it comes to managing your home or office network, accessing your router’s configuration settings is essential. The IP address is a commonly used private IP address that many router manufacturers assign to their devices. In this article, we will guide you through the process of logging in as an admin to your router using the IP address.


The IP address belongs to the private IP address range defined by the Internet Assigned Numbers Authority (IANA). Private IP addresses are reserved for use within local networks and are not directly accessible from the internet. The IP address is typically assigned as the default gateway IP to routers and other network devices.

Accessing Your Router’s Configuration

To access your router’s configuration settings using the IP address, follow these steps:

Connect to Your Router

Ensure that your computer or device is connected to the router’s network either via an Ethernet cable or a wireless connection.

Open a Web Browser

Launch your preferred web browsers, such as Chrome, Firefox, or Safari.

Enter the IP Address

In the address bar of your web browser, type “” (without quotes) and press Enter. You should see a login page.

Enter Login Credentials

On the login page, you will be prompted to enter your router’s admin username and password. These credentials are specific to your router and are often found on a sticker attached to the device itself or provided in the router’s documentation. Enter the username and password correctly and click on the “Login” or “Submit” button.

Access Router Settings

After successful authentication, you will gain access to your router’s configuration interface. Here, you can modify various settings such as network security, Wi-Fi settings, port forwarding, and more. Be cautious while making changes, as incorrect settings can disrupt your network’s functionality.


While accessing the router’s configuration page using the IP address can be straightforward, occasional issues may arise that prevent successful login. This troubleshooting guide aims to assist you in overcoming common obstacles encountered during the process.

Verify Network Connectivity

Ensure that your computer or device is properly connected to the router’s network. Check your Ethernet cable or Wi-Fi connection to ensure it is functioning correctly. If you are using Wi-Fi, verify that you are connected to the correct network.

Double-Check the IP Address

Reconfirm that you have entered the IP address correctly. Mistyping the IP address can prevent access to the router’s configuration page. Check for any leading or trailing spaces and ensure you have used the correct sequence of numbers (

Check Firewall and Security Settings

Firewalls or security software on your computer may sometimes interfere with accessing the router’s configuration page. Temporarily disable any antivirus or firewall software and attempt to log in again. If successful, adjust the settings to allow access to the router’s IP address ( while keeping your system protected.

Use a Different Web Browser

If you are experiencing difficulties accessing the router’s configuration page using your current web browser, try using an alternative browser. Sometimes, browser-related issues can prevent successful login. Popular alternatives include Chrome, Firefox, Safari, and Edge.

Clear Browser Cache

Clearing your browser’s cache and cookies can resolve issues related to stored or outdated data. Access your browser’s settings or preferences and clear the cache and cookies. Close the browser completely and try accessing the router’s configuration page again.

Restart Your Router and Device

A simple restart can often resolve connectivity issues. Turn off your router and unplug it from the power source. Wait for a few seconds, then reconnect the power and turn on the router. Restart your computer or device as well. Once both devices have rebooted, try accessing the configuration page again.

Factory Reset Your Router

If all else fails and you are still unable to access the router’s configuration page, you can try performing a factory reset on your router. Keep in mind that this will erase any custom settings and configurations you have made. Look for a small reset button on your router and press it using a pin or paperclip. Hold the button for about 10 seconds, and the router will revert to its default settings. Afterward, try accessing the configuration page using the default login credentials provided by the manufacturer.


Accessing your router’s configuration settings is crucial for managing your network effectively. By following the steps outlined in this article, you should be able to log in as an admin using the IP address. Remember to exercise caution when making changes to your router’s settings, and always keep your login credentials secure.

Leave a Comment