– Login Admin


The IP address is a private IP address commonly used as the default gateway for many home and small office networks. It falls within the range of IP addresses reserved for private networks and cannot be accessed from the internet. When devices are connected to a network, they are assigned unique IP addresses to facilitate communication. is often used as the default gateway IP address by network routers or modems.

This IP address allows devices on the network to communicate with each other and access the internet. Users can access the administration panel of the router or modem by entering in a web browser, enabling them to configure network settings, security options, and other parameters. It’s important to note that this IP address can vary depending on the network setup, and if it doesn’t work, users should consult the device’s manual or contact their network administrator for assistance.

Default logins for

The default login credentials for the IP address can vary depending on the device manufacturer and model. However, here are some commonly used default login details that you can try:

  • Username: admin Password: admin
  • Username: admin Password: 1234
  • Username: admin Password: [blank] (leave the password field empty)

Please note that these are generic default credentials, and it’s highly recommended to change them for security reasons. If none of these login combinations work, you may need to consult the device’s manual or visit the manufacturer’s website for the correct default login information.

Login Steps

To log in to a device using the IP address, please follow these steps:

  1. Make sure your device (computer, smartphone, or tablet) is connected to the same network as the device with the IP address
  2. Open a web browser (such as Chrome, Firefox, or Safari) on your device.
  3. In the address bar of the web browser, type “” and press Enter or Return on your keyboard. This will direct you to the login page of the device’s administration panel.
  4. On the login page, you will be prompted to enter your username and password.
  5. Enter the correct username and password for the device. If you haven’t changed the login credentials before, you can try using the default ones. However, it’s important to note that default credentials are often changed for security purposes.
  6. After entering the username and password, click on the “Login” or “Submit” button to proceed.
  7. If the provided credentials are correct, you will be logged in to the admin panel of the device. From there, you can access and modify various settings and configurations.

Remember to keep your login credentials secure and consider changing them to personalized ones for enhanced security.


If you are experiencing issues while trying to log in to the device with the IP address, you can follow these troubleshooting steps:

Double-check the IP address

Ensure that you have entered the correct IP address ( in the web browser’s address bar. Typos or incorrect digits can prevent successful access.

Verify network connectivity

Make sure your device is connected to the same network as the device with the IP address Check your Wi-Fi or Ethernet connection to ensure it is active and stable.

Restart your devices

Sometimes, a simple restart can resolve temporary glitches. Restart your computer or smartphone, as well as the router or modem associated with the IP address After restarting, attempt to log in again.

Clear browser cache

If you have accessed the login page before, clearing your browser’s cache and cookies can help resolve issues related to cached data. Go to your browser’s settings and clear the browsing data, then try accessing the login page again.

Try a different web browser

Switching to a different web browser can help determine if the issue is browser-specific. Try using Chrome, Firefox, Safari, or another browser to access the login page.

Reset the device

If none of the above steps work, you may need to reset the device to its factory settings. Keep in mind that resetting will erase any customized settings and configurations. Look for a small reset button on the device and press it for a few seconds using a paperclip or a pin. Afterward, you can try logging in with the default login credentials.

Consult the device’s manual or support

If the issue persists, refer to the device’s manual or visit the manufacturer’s support website for further assistance. They may have specific troubleshooting steps or firmware updates that can resolve the login problem.

By following these troubleshooting steps, you should be able to identify and resolve common issues encountered while attempting to log in to the device with the IP address

A Complete Guide on IP Address

What Is an IP Address?

An IP address, short for Internet Protocol address, is a numerical label assigned to devices connected to a computer network. It serves two main purposes: identifying the host or network interface and providing the location of the device in the network.

IP addresses can be categorized into two types: IPv4 (Internet Protocol version 4) and IPv6 (Internet Protocol version 6). IPv4 addresses consist of four sets of numbers separated by periods, such as, and are more commonly used. On the other hand, IPv6 addresses are longer and written in hexadecimal format to accommodate the growing number of devices connected to the internet. – A Popular IP Address

The IP address is a commonly used private IP address. Private IP addresses are reserved for internal networks and are not accessible from the internet. They are used to identify devices within a local area network (LAN). is often designated as the default gateway IP address for many home and small office routers or modems. The default gateway acts as the intermediary between devices on the local network and the internet, allowing them to communicate and access online resources.

When you connect a device to a network with a router or modem, it is assigned a unique IP address. By entering into a web browser, you can access the administration panel of the router or modem. From there, you can configure various network settings, security options, port forwarding, DHCP (Dynamic Host Configuration Protocol), and other parameters.


Understanding the IP address and its significance within a network is essential for managing and configuring devices effectively. As a popular default gateway IP address, it serves as a crucial connection point between devices in your local network and the internet. By accessing the administration panel through a web browser, you can modify network settings, security options, and other parameters to optimize your network setup.

Leave a Comment