– Login Admin


The IP address belongs to the private IP address range defined by the Internet Assigned Numbers Authority (IANA). Private IP addresses are reserved for internal use within private networks and cannot be accessed directly from the Internet. is typically assigned to the default gateway, acting as a bridge between the local network and the wider internet.

Default logins for

Here are the default login credentials commonly used for accessing the admin panel at

  • Username: admin, Password: password
  • Username: admin, Password: admin
  • Username: admin, Password: 1234
  • Username: (blank), Password: admin
  • Username: admin, Password: (blank)

It’s important to note that these default login credentials may vary depending on the specific network device or manufacturer. It is highly recommended to change these default credentials to ensure the security of your network.

Login Steps

Here are the steps to log in to the admin panel at

Connect your device

Make sure your device is connected to the same network as the device with the IP address This can be done through a wired or wireless connection.

Open a web browser

Launch a web browser on your device. You can use popular browsers like Google Chrome, Mozilla Firefox, or Microsoft Edge.

Enter the IP address

In the address bar of the web browser, type “” and press Enter. This will direct you to the login page of the admin panel.

Enter login credentials

On the login page, you will be prompted to enter the username and password. Provide the correct login credentials. If you haven’t changed them from the default, use the default username and password.

Click on “Login” or “Submit”

Once you have entered the login credentials, click on the “Login” or “Submit” button to proceed. If the credentials are correct, you will be granted access to the admin panel.

Explore the admin panel

After successfully logging in, you will have access to the various configuration and management settings of the network device associated with You can now make changes, set up security options, manage network resources, and troubleshoot issues as needed.

It’s important to remember that the login steps may slightly vary depending on the specific device or manufacturer. If you encounter any difficulties during the login process, refer to the device’s documentation or contact the network administrator for assistance.

Reset And Troubleshoot The Router

Resetting and troubleshooting a router can help resolve various issues and restore it to its default settings. Here are the steps to reset and troubleshoot a router:

Power cycle the router

Turn off the router by unplugging its power adapter from the power source. Wait for about 10 seconds and then plug it back in. This will refresh the router’s settings and potentially resolve any temporary issues.

Check the connections

Ensure that all cables connected to the router are secure and properly inserted. Make sure the Ethernet cable is connected from the modem to the router’s WAN or Internet port.

Verify internet connectivity

Connect a device directly to the modem using an Ethernet cable and check if you have a stable internet connection. If there is no internet access, contact your internet service provider (ISP) to troubleshoot the connection.

Perform a factory reset

If the router continues to experience issues, you can perform a factory reset. Locate the reset button on the router (usually a small hole) and use a paperclip or a similar object to press and hold the button for about 10-15 seconds. This will reset the router to its default settings.

Reconfigure the router

After the factory reset, you need to reconfigure the router. Access the router’s admin panel by entering the default IP address (such as or in a web browser. Log in using the default username and password (refer to the router’s documentation for the correct credentials).

Update firmware

Once you have logged into the router’s admin panel, check for firmware updates. If an update is available, download and install it according to the router manufacturer’s instructions. Firmware updates can improve router performance and fix known issues.

Modify wireless settings

If you are experiencing Wi-Fi connectivity problems, try changing the wireless channel in the router’s settings. Select a channel with less interference from neighboring networks.

Disable unnecessary features

Disable any unnecessary features or services in the router’s settings. This can help optimize the router’s performance and reduce potential conflicts.

Contact technical support

If the troubleshooting steps above do not resolve the issues, contact the router manufacturer’s technical support or consult with a networking professional for further assistance.

Remember, resetting the router will erase any customized settings, so it’s advisable to backup your configuration settings before performing a factory reset.


Understanding how to log in to the admin panel at can provide you with access to crucial network configuration and management settings. By following the steps outlined in this article, you can successfully log in and make necessary changes to optimize your network performance. It’s important to remember to change the default login credentials to enhance the security of your admin panel. Implementing strong passwords and enabling additional security measures like two-factor authentication can further protect your network from unauthorized access.

Leave a Comment